HAILO AS Tandem 24/7 · pull-out recycling bin 3666111

HAILO 3666111 waste sorting system with 24 + 7 litre buckets for fitting inside a cupboard with a hinged door.

HAILO AS Tandem 3666111, dark grey bins in their pull-out frame.
Photograph: HAILO · 3666111
The kitchen cupboard illustrates the installation setting and is not included.
Width
25.1 cm
Depth
48.2 cm
Height
40 cm
Dimension diagram, not a photograph
Width 25.1 cm Depth 48.2 cm · Height 40 cm OUTER VOLUME · SCHEMATIC VIEW
Dimension diagram, not a photograph. Shows the outer space, not the appearance, colour or internal layout.

Description and use

This pull-out system separates waste inside a cupboard. The buckets move forwards on runners and can be lifted out for emptying. The assembly needs fixing to the cupboard floor, with clearance to open the door and remove the buckets. It is neither a freestanding bin nor a basket hung from the door.

Documented information

  • Product dimensions: 251 x 482 x 400 mm (width x depth x height).
  • Manufacturer’s stated nominal cupboard width: from 300 mm. This is not the clear internal width.
  • Buckets: 24 + 7 litres.
  • Model: 3666111; GTIN: 4007126366634.

The current data sheet and an earlier drawing differ on depth. Some retailer fields also mix units or packaging dimensions. We retain the manufacturer data sheet dimensions as documentary information; no installation profile has been approved.

Advantages

  • Waste separation stays inside the cupboard rather than taking up a permanent position on the kitchen floor.
  • The runners provide access to the buckets, which can be emptied separately.

Drawbacks

  • Fixings and pull-out clearance are needed; this is not a loose, freestanding solution.
  • The buckets have different capacities. Check whether that split suits your household waste.

Who we recommend it for

For waste sorting inside a hinged-door cupboard where the fitting conditions can be checked. Beneath a sink, the trap and pipework may reduce usable space. Nominal cupboard width alone does not establish a suitable fit.

What to check before buying

  • Measure the clear interior, door opening and pull-out clearance; account for hinges, pipes and obstructions.
  • Consult the drawing and ask the manufacturer to resolve the differing depth information before installation.
  • Check the model, finish and complete assembly; replacement buckets are separate products.

Sources and scope

HAILO’s product sheet and documentation are linked below. Our own documentary analysis, without a physical test or installation guarantee. The local affiliate link leads to the checked variant; consult Amazon.co.uk for current prices and terms.

Editorial reference without a compatibility assessment. Documentary assessment without a physical test or approved installation profile. Documents and retailer fields contain differing dimensions: confirm clearance and fixing requirements before buying.

Cubifora ·

Product identity and source

HAILO AS Tandem 24/7 · pull-out recycling bin 3666111

HAILO · 3666111

Other options in this category

Practical guides

30 or 40 cm cupboards: why nominal width is not enough

Nominal width identifies a cabinet family, not the clear space available. Cabinets with the same nominal size can use different panels, hinges and construction. Record nominal size separately from internal measurements.

Adjustable Separators: what to check before buying

Check both ends of the adjustment range. A maximum length greater than your drawer width does not prove that the minimum is short enough. Distinguish product length from the manufacturer’s permitted working span.