HAILO AS Tandem 24/7 · pull-out recycling bin 3666111

HAILO 3666111 waste sorting system with 24 + 7 liter buckets for installation inside a cabinet with a hinged door.

HAILO AS Tandem 3666111, dark gray bins in their pull-out frame.
Photo: HAILO · 3666111
The kitchen cabinet illustrates the installation setting and is not included.
Width
25.1 cm
Depth
48.2 cm
Height
40 cm
Dimension diagram, not a photograph
Width 25.1 cm Depth 48.2 cm · Height 40 cm OUTER VOLUME · SCHEMATIC VIEW
Dimension diagram, not a photograph. Shows the outer space, not the appearance, color or internal layout.

Description and use

This pull-out system separates waste inside a cabinet. The buckets move forward on slides and can be lifted out for emptying. The assembly needs to be secured to the cabinet floor, with clearance to open the door and remove the buckets. It is neither a freestanding trash can nor a basket hung from the door.

Documented information

  • Product dimensions: 251 x 482 x 400 mm (width x depth x height).
  • Manufacturer’s stated nominal cabinet width: from 300 mm. This is not the clear inside width.
  • Buckets: 24 + 7 liters.
  • Model: 3666111; GTIN: 4007126366634.

The current data sheet and an earlier drawing differ on depth. Some retailer fields also mix units or package dimensions. We retain the manufacturer data sheet dimensions as documentary information; no installation profile has been approved.

Advantages

  • Waste separation stays inside the cabinet rather than taking up a permanent spot on the kitchen floor.
  • The slides provide access to the buckets, which can be emptied separately.

Drawbacks

  • Fasteners and pull-out clearance are needed; this is not a loose, freestanding solution.
  • The buckets have different capacities. Check whether that split suits your household waste.

Who we recommend it for

For sorting waste inside a hinged-door cabinet where installation requirements can be checked. Under a sink, the drain trap and plumbing may reduce usable space. Nominal cabinet width alone does not establish a suitable fit.

What to check before buying

  • Measure the clear interior, door opening, and pull-out clearance; account for hinges, plumbing, and obstructions.
  • Consult the drawing and ask the manufacturer to resolve the differing depth information before installation.
  • Check the model, finish, and complete assembly; replacement buckets are separate products.

Sources and scope

HAILO’s product sheet and documentation are linked below. Our own documentary analysis, without a physical test or installation guarantee. The local affiliate link leads to the checked variant; consult Amazon.com for current prices and terms.

Editorial reference without a compatibility assessment. Documentary assessment without a physical test or approved installation profile. Documents and retailer fields contain differing dimensions: confirm clearance and installation requirements before buying.

Cubifora ·

Product identity and source

HAILO AS Tandem 24/7 · pull-out recycling bin 3666111

HAILO · 3666111

Other options in this category

Practical guides

30 or 40 cm cabinets: why nominal width is not enough

Nominal width identifies a cabinet family, not the clear space available. Cabinets with the same nominal size can use different panels, hinges and construction. Record nominal size separately from internal measurements.

Adjustable Separators: what to check before buying

Check both ends of the adjustment range. A maximum length greater than your drawer width does not prove that the minimum is short enough. Distinguish product length from the manufacturer’s permitted working span.