cubifora.
EspañolFrançaisDeutschItalianoEnglish (UK)English (US)
Country and language

Your choice is saved in this browser for 180 days. You can change it at any time.

Brabantia SinkSide 302466 · dark grey in-sink organiser

Dark grey in-sink organiser for sponges and dishcloths, with a suction cup, non-slip support and an open base that lets water drain into the sink.

Empty dark grey Brabantia SinkSide 302466 organiser with front dishcloth rail and rear holder.
Photograph: Brabantia · 302466
Official photograph of the empty dark grey model 302466. It does not establish attachment, load capacity or the size of tools that fit.
Height
10.6 cm

Description and use

Groups sponges, dishcloths and small washing-up tools inside the sink bowl. The holder uses a suction cup and non-slip support; the front rail holds a dishcloth. The open base lets water flow into the sink.

Documented information

  • Model 302466; GTIN 8710755302466.
  • The manufacturer lists length 171 mm, width 127 mm and height 106 mm. Confirm which axis corresponds to the front and depth of your installation.
  • Plastic body, dark grey finish. Container and holder separate for cleaning; the manufacturer permits dishwasher cleaning.

Advantages

  • Clears worktop space and keeps tools close to the tap.
  • The open base and cloth rail allow draining over the sink bowl.

Drawbacks

  • Uses some of the sink’s working space. The suction cup may not hold on coated, textured or sloping surfaces, or a raised rim.

Who we recommend it for

For keeping tools in a bowl with a smooth, flat, straight wall, leaving sufficient room for the tap and washing large containers.

What to check before buying

  • Check surface geometry and finish; sink colour does not establish suction-cup adhesion.
  • Measure occupied space and access with tools loaded. Cubifora has not validated a maximum load or holding force.
  • Clean the support surface. Rinse the suction cup in warm water, leave it slightly damp and press firmly as instructed by the manufacturer.
  • Separate parts for cleaning and confirm the model and finish supplied.

Sources and scope

Official Brabantia page and model photograph, linked below. Our own documentary recommendation without adhesion, load or installation trials. Model identity checked in the local Amazon store.

Editorial reference without a compatibility assessment. Adhesion depends on the sink surface and geometry. Confirm orientation, space and attachment; installation compatibility is not established.

Cubifora ·

Product identity and source

Brabantia SinkSide 302466 · dark grey in-sink organiser

Brabantia · 302466

Other options in this category

Practical guides

30 or 40 cm cupboards: why nominal width is not enough

Nominal width identifies a cabinet family, not the clear space available. Cabinets with the same nominal size can use different panels, hinges and construction. Record nominal size separately from internal measurements.

Adjustable Separators: what to check before buying

Check both ends of the adjustment range. A maximum length greater than your drawer width does not prove that the minimum is short enough. Distinguish product length from the manufacturer’s permitted working span.